|
|
Microprocessor Controlled System with Air and Skin Modes of operation. |
|
|
Displays Air / Skin Temperature simultaneously with Set temperature. |
|
|
Feather Touch operation with large digital display and comprehensive alarms. |
|
|
Memory backup to restore set temperature and control mode automatically in the event of power failure. |
|
|
An integral and withdrawable baby tray to aid resuscitation during transport. |
|
|
An integral Humidifier. |
|
|
Internal battery Backup for 4 hours minimum. Operates both on AC and DC currents, with visual indication for battery power status and power sources. |
|
|
Collapsible stainless steel stand with shock absorbers. |
|
|
Dual Thermistor Temperature Probes, with accuracy of +0.2°C, to minimize down time and ensure accuracy. Probe interchangeable without calibration. |
|
|
A, 2D (or) 2E tank mounting facility to mount gas cylinders. |
|
|
Unimpeded access to the patient with frontal access and a minimum of 2 access ports and three elbow operated ports. |
|
|
Easy to clean and disinfect. |
|
|
High Intensity CFL Light for observation. |
|
|
Comprehensive alarms: Air Temp. Low / High, Skin Temp. Low / High, Sensor Failure, Low Battery, Heater Failure, Power Failure, Air Flow Failure, Temperature > 39 ° C, O2 Flow failure (optional). |
|
|
Automatic Heater cut off if air / skin temperature inside the incubator exceeds 39° C. |
|
|
Set Temperature Range: Air - 20 ° C to 39° C, Skin - 30 ° C to 38.3° C. |
|
|
O2 Driven Venturi Slow Suction with humidified O2. |
|
|
A type cylinder - aluminium, Pressure Regulator Assembly, IV Stand Facility. |
|
|
Accessories: Auxiliary Tray for placing additional equipment. |
|
|
Optional Accessories: Pressure Regulator, Flow meter, O2 Cylinder, O2 Failure Alarm, O2 Driven Venturi Slow suction. |
